There are a number of ways to test for radon in your home. Some tests are continuous, while others are one-time. The first method involves hiring a measurement professional to do the testing. This professional should be certified to use a calibrated radon detector and work in a clean, safe environment. It is also important to choose a laboratory that has higher accreditations.
Radon levels in homes usually increase during the winter season, so it is advisable to test before winter begins. For short-term tests, you can use a radon kit that measures radon levels over two to four days. These kits are available at most hardware stores and can be ordered online. They cost less than $20. Some home inspection companies include radon testing in their service packages.
EPA guidelines recommend that short-term tests be conducted in the lowest level of a home, which represents the highest amount of radon. In addition, testing should be done in a room that is regularly used. Test devices should be placed in rooms away from drafts or sources of high humidity, and they must be kept silent during sampling.
Radon is a dangerous gas that is difficult to detect without a test. Although it does not have any symptoms, it can lead to serious health problems. Radon testing can detect radon levels and determine if remediation is necessary. In Fair Lawn, New Jersey, one in fifteen homes is estimated to contain high levels of radon. This is a major health risk, and if left unchecked, the gas can cause lung cancer. If you’re worried that your home is unsafe, radon testing is the only way to be sure.
Utilizing a charcoal canister as a test for radon is by far the most typical approach. Activated charcoal, which is contained within the canister, works to absorb radon gas. After that, the material is taken to a laboratory so that it may be measured. These kinds of watchful observations normally endure for a period of forty-eight hours, however some of them go on for longer. During the time when the garbage is being collected, it is essential to keep all windows and doors closed. If you leave your windows open, the sample could become contaminated, which would result in an inaccurate reading.
Getting a radon test is simple and doesn’t cost very much money. A kit can be purchased at a hardware store for somewhere between ten and thirty dollars. The majority of examinations can be finished in significantly less than an hour. In the future, it is also highly recommended to get a second examination. If the initial test reveals that high levels of radon are present in your house, you should seriously consider having a radon mitigation system installed so that you can bring those levels down.
Radon is a naturally occurring gas that can be present in every home. Its entry points are not restricted to cellars; well water is another potential entry point. As a consequence of this, radon testing is required in every single home in order to protect the health of the people living there.
